Any holiday, especially New Year and Christmas, requires careful preparation. This is not only about buying gifts for family and friends, a festive feast and a Christmas tree with a bright garland. It is necessary to create a festive atmosphere in your home and . And for this we begin to decorate our home from the very threshold. Today we will make a New Year's wreath with our own hands. And we will definitely attach what we get to the front door. And then decide for yourself, outside or inside!

First you need to think about which materials Your New Year's wreath will be made. Believe me, the choice can be quite wide. Namely:

• a traditional wreath made of thuja or conifer branches with the addition of various decorations
• from natural cones
• from New Year's toys
• from tinsel
• organza
• made of artificial materials imitating the branches of coniferous trees
• from feathers!

This article will discuss options for making a festive wreath from all of the above materials.

You need to start making a festive wreath from natural branches of coniferous plants by preparing all the necessary materials and tools. A tools you will need simple ones:

• scissors
• wire cutters
• glue gun and glue sticks

Materials you may need:

• branches of thuja or coniferous tree - spruce, pine, cedar
• wreath base
• strong and not too thin threads or twine
• thin, flexible wire
• glue "Moment Crystal"
• Christmas decorations
• serpentine and tinsel
• gift paper and gift bows
• organza
• feather boa

Making a wreath is impossible without a base on which it will be attached. Therefore, first of all we choose her in order to form a New Year's wreath. Read on to find out which base to choose for your craft.

When the basis for the New Year's wreath has already been chosen, we begin to make the wreath itself. To do this, take one or two small branches of thuja or ephedra and tie them tightly to the base. We secure the thread so that it does not unwind. Next, we sequentially apply the following branches and secure them again. And so we move over the entire surface of the base until it is completely covered with branches and you get a wreath.

The size of the wreath directly depends on the size of the base. For a wreath made from natural branches of coniferous trees, choose a solid base, as the weight of the wreath is impressive.

Such wreaths made from natural materials can be decorated with cones and clusters of autumn berries: viburnum, black and red rowan. Of course, such a wreath will not last long: the berries will wither and wrinkle, and the needles will begin to fall off. Therefore, if you want your New Year’s wreath to be more durable, replace natural ingredients with artificial ones.

Artificial elements often look no worse than natural ones.

How to make a wreath from pine or cedar branches, watch this video.

Needless to say, now everything can be bought in stores. But a wreath made by yourself will still be better, even if, due to inexperience, you make it a little “disheveled.” Handwork in such things is always highly appreciated.

Of course, you often want to decorate a New Year’s wreath with everyone at once. But you shouldn't be too zealous. There must be moderation in everything. Choose something from your existing home:

• small Christmas toys
• small “gifts” made of foil
• bumps
• bows
• tapes
• artificial flowers
• nuts
• candies and so on...

Decorating a wreath with pine cones is a simple, affordable and, perhaps, correct option. If you took natural branches for the wreath, then pine cones and matting are what you need for decoration.

Natural pine cones also make very beautiful Christmas wreaths. To make them you will need mainly pine cones. But spruce and smaller alder trees will not be superfluous.

Watch the master class in this video and you can easily make a wreath of pine cones with your own hands.

If you don’t have the time or desire to make the wreath voluminous and large, make a simple version - stick the pine cones in one row on a cardboard hoop, add some decorations. You will get a very nice wreath.

In my opinion, of course, the most beautiful New Year's wreaths are made from pine cones with the addition of berry branches.

If you want something unusual, spray paint the fir branches and cones in the color you like. For example, in blue.

Silver color has always been the embodiment of crunchy snow in the cold, fresh air and winter holidays. Nothing has changed! Everything goes on!

Another video on this topic.

A wreath of coniferous or thuja branches can decorate not only a door or wall, but also a chandelier!

In addition to a New Year's wreath from pine cones or branches, you can quickly make a wreath from organza and Christmas tree balls. To do this, take the organza to which you will tie and simply tie large bows around it. Organza is a fairly stiff material and holds its shape well. Bright balls can be glued or tied to the base of the wreath.

Imagine and come up with a look his New Year's wreath. Decorate it with something unusual, like pretty feathers!

If you do not use natural materials in an organza wreath, then the wreath can decorate your home for a long time.

Doesn’t this “Santa Claus” cheer you up?

Elegant and yet impressive looking feather wreaths. To make them, they use ready-made feather scarves (also called boas) and Christmas tree balls.

New Year's feather wreaths are something romantic and at the same time delightful. Suitable for dreamy and pure natures.

All this is good when you can buy what you need in stores for the holidays. But it’s another matter when you want to do something similar (and maybe even better) with your own hands. When preparing for the holidays, a pre-holiday mood settles in the house, creating that same atmosphere of home where you want to return. If you feel a craving for creativity during the New Year's Eve, do not suppress this impulse within yourself, but give yourself the opportunity to translate this desire into something significant. For example, do it yourself New Year's wreath made of Christmas tree toys .

You can probably imagine how many different compositions can be assembled from Christmas tree balls! But it can also be a wreath made from a variety of toys that you have at home. Or you can collect only cold (or warm) shades for your craft.

To make a wreath from Christmas tree decorations, you can use any kind and stick balls or icicles on it. Or you can string as many toys on a strong wire as will fit on it. To make the wreath more voluminous, glue the remaining balls with hot glue.

Tinsel wreath can be made quite quickly. We wrap a foam or cardboard base with tinsel and decorate it with a Christmas poinsettia flower. Add figures and beads that you can find at home.

A tinsel wreath does not require a strong and reliable frame. A simple cardboard hoop will be enough.

Use the advice of those who have already made New Year's wreaths with their own hands.

,
However, I found a very detailed master class on the net..

1. The first thing we do is take the base, which we need to make voluminous. Cut out a stencil - a ring - from cardboard. To make our wreath look harmonious, let's remember the rule of the golden ratio - to calculate the outer diameter of a cardboard ring, you need to multiply the size of the inner diameter by 1.6.

Take twine or wire (floral) and scissors. We create a frame from a stencil and paper. Squeeze the paper tightly. We cut off the excess. With a second layer of twine we level and further compact the frame. You should try to pull the paper in one direction. We smooth out the imperfections with our hands. We get something like a donut.

3. The next step can be taken in several ways. With special staples, a hot glue gun or twine (thick, green). We will need 2 good branches of nobles (spruce variety). This variety is good because a wreath made from such a spruce will stand until spring without crumbling.

4. So, we take the spruce branches and start working with pruning shears. Place the cut branch on the inner surface of the frame and secure it with staples, twine or glue.

We must make sure that the spruce is well fixed. The thickness must be placed in different places so that it is natural. Cover all visible gaps to create a sense of continuity and uniformity. If there are any holes in the wreath, you can glue the flaws directly onto the gun.

5. The next step is decoration. We chose red and white colors. White always goes well with red. To decorate our Christmas wreath we will use: gift filler (to imitate ilix branches), Christmas balls, snowflakes from a Christmas tree garland, nuts, cones and New Year's ribbons.

First, we take ordinary Christmas tree balls and break off all the excess. We place them on the wreath first of all as the largest elements of the composition. Next, we separate the details we like from the garland - stars or snowflakes - and attach them.

6. We will make ylix twigs with our own hands using gift filler and thin sticks. We coat the stick with glue and lower it into the filler, carefully adjusting it if necessary. We attach the finished ilix branches to the wreath.

7. Paint the walnuts and hazelnuts with white water-based matte paint. We use a rough brush, deliberately not painting some areas, in order to achieve the effect of fallen frost. The paint dries very quickly and has virtually no odor. It is better to paint hazelnut twice.

The next thing we'll take is rosehip. Like hazelnuts, it is better to make clusters out of them. We wait for the glue to dry and begin decorating. We try to attach it naturally to create the impression that the berries are growing from spruce branches. For such decoration, anything will suit us: ordinary pine cones or alder, everything that grows in the forest - birch catkins, cones, pieces of bark, seed pods.

8. The final stage remains. We take a beautiful New Year's ribbon and finish decorating our wreath. You can also make the ribbon yourself. The final touch is to choose a whitewashed candle, the whiter the better. Place a candle in the middle of the wreath and decorate the Christmas table.

Relatively recently it has taken its place among the most beloved holiday decorations. Protestant pastor Johann Hinrich Wichern made it in 1839 for his children who asked when Christmas would be. This wreath was made from an old wooden wheel with four candles, each of which was lit on Sunday for four, three, etc. weeks before the great holiday and helped the children count down the time until it. This beautiful idea took root in Christianity and became widespread.

In this article we will tell you how to make a Christmas wreath with your own hands in a traditional style from twigs and pine cones, as well as how you can create it from materials that are completely unexpected at first glance. The result of your labors will not be inferior to ready-made store-bought products in beauty and will certainly surpass them in originality.

Bright and festive

If you like to highlight your personality in everything, you will love this wreath. The letter used to decorate it may contain your last name.

To make a Christmas wreath with your own hands, you need:

• grapevine base ring;
• unbreakable Christmas balls and other plastic decorations of various sizes;
• multi-colored ribbons;
• colored mesh;
• wooden letter;
• acrylic paints;
• wire.

Procedure:

1. We start working by decorating the letter. Let's paint it in the main color (here red), then add multi-colored polka dots (white and green).
2. Now we will thread the wire into the fastenings of large balls and screw them to the base ring.
3. Then we will tie bows from mesh ribbon directly on the vine. To make the wreath more magnificent, cut their edges.
4. When the letter is dry, drill holes in it to thread wire through to secure it to the wreath.
5. Let's fill the remaining empty spaces with small Christmas tree decorations and multi-colored bows.

Let's simplify the problem

In 10 minutes you can make this monogrammed Christmas wreath with your own hands. Photo:

All that was used here was a vine wreath, a letter, a faux tree branch with embellishments, and a hot glue gun. Like a construction set, it all needs to be put together - and the wreath will be ready. The main thing is that wherever the branch and the letter touches the base, try to apply droplets of glue.

MK: DIY Christmas wreath

In this master class we will teach you how to professionally work with natural materials. You will need:

• wire base for the wreath (you can use a ready-made one, or you can make one from two hangers);
• floral wire;
• moss, spruce branches;
• decorations - cones, balls, bells, painted sticks, etc.;
• colored ribbon for bow.

Work progress:

Wreath decoration

Since we are working with natural material, it is advisable to think in advance about how you will decorate the product and sketch out a diagram on paper. For a wreath, as in the photo, proceed as follows:

• Make a lush bow, thread a wire through it and secure it to a ring of branches. If desired, you can add a beautiful large bead or brooch.

• Paint the pine cones with white or silver paint around the edges. Then wrap the wire between the scales at their base and stick it into the base of the wreath. When the ends of the wire appear on the wrong side, bend them and hide them back in the moss. Change the angle of the cones so that they look natural, but at the same time add volume. At this stage, it is convenient to work like this: place the wreath on the table so that the edge of the product is in the air. Hold the wreath with one hand, decorate with the other, gradually rotating it.

• Attach bunches of twigs painted to match, balls, bells and other decorative elements that you have.

Simple and inexpensive

But such a New Year's Christmas wreath, made with your own hands, requires minimal material costs. To make it you need:

• cones (collect them in the nearest forest);
• wire hanger;
• ring beads with a diameter slightly larger than the thickness of the hanger;
• ribbon;
• glue gun;
• artificial snow, white paint (optional).

Manufacturing:

The cones can be decorated with artificial snow or lightly painted with paint, like the previous wreath.

Unusual DIY Christmas wreath step by step

Who said that you need to use only natural materials? Look at this gorgeous wreath made of Christmas balls.

It is beautiful, festive, even a little glamorous. It can easily be placed not on the door, but in the room. For such crafts, you need to take unbreakable balls. Then the wreath will serve you for many years and will be absolutely safe for children and pets. In addition, plastic decorations are cheaper than glass ones.

You will need:

• balls - for the wreath, as in the photo, about 125 were used;
• base ring made of wicker or foam;
• glue gun

For work, it is better to use jewelry in the same color scheme, but in different shades and sizes. If you have unnecessary balls, you can paint them. This way you will save on materials. For variety, you can add glitter elements.

How to make such a Christmas wreath with your own hands:

Even a child can do it

Did you know that you can even make a Christmas wreath from plastic bags with your own hands? Photo:

Agree, it’s original and absolutely not expensive. If you are afraid that the wreath from your apartment door may disappear in an unknown direction, then use this idea. This is also an interesting option for creativity with children. You will need:

• plastic bags - two colors (1 package of each);
• white wire hanger;
• scissors;
• ribbon;
• pin;
• a faux holly sprig or other small Christmas decoration and some wire to attach it (optional).

This wreath is made like this:

1. Give the hanger a round shape.
2. Cut the plastic bags into strips measuring about 8*4 cm. Their length and width can be varied according to your idea.
3. Now simply tie the plastic strips on the hanger, alternating colors. Continue until the wreath becomes full and voluminous.
4. Trim the excess, protruding strips, but do not overdo it so as not to spoil the round shape.
5. Tie a ribbon bow and pin it to the hanger.
6. Wrap wire around the holly sprig and secure it to the wreath.

Second life for old things

Using the same principle, a DIY Christmas wreath is made from pieces of fabric.

Have you decided to go through your closet before the holidays? Turn unnecessary items into beautiful and cozy decorations. For the sake of pomp in this work, a base for a wreath made of four wire rings was used, but such a structure can be built independently.

On the eve of the New Year and Christmas holidays, the desire inevitably arises to decorate your home with something new or unusual. Some people buy boxes of Christmas decorations, others... But overseas jewelry, which only yesterday surprised with its colorfulness only from pictures, is gaining more and more popularity. We are talking about Christmas wreaths. Definitely, you can buy this decor before Christmas to add to your home collection. But homemade jewelry looks much more interesting. The designers of the Zatusim website have prepared several master classes with step-by-step photos that will help you figure out how to make and decorate a Christmas wreath with your own hands.

Classic Christmas wreath made of fir branches

It is coniferous branches that form the basis of the classic Christmas wreath. Various new ideas for making wreaths from fabric and thread, beads and ribbons, tinsel and wicker, and even toilet paper and bottle caps are variations that look colorful, but have nothing in common with a Christmas decoration - a wreath symbolizing the infinity of time and counting down the weekdays. and holidays until Christmas.

In the classic version, spruce, pine, and juniper branches can be used as a base. It is the pine needles that give this decoration New Year's shades, filling the room with traditional aromas.

But you can make a decoration for a spruce Christmas wreath with your own hands from any available material.

First, let's learn how to make a classic Christmas wreath with your own hands - with step-by-step master classes it is very easy to do.

Spruce Christmas wreath with pine cones

You will spend no more than an hour making a Christmas wreath from fir branches with your own hands, and it will delight you with its grace, beauty and excite all the holidays with its pine smell.

To make it you will need:

• Fir branches – 15 – 20 pcs.;
• Cardboard – 40x40 cm;
• Sheets of paper – 10 – 15 pcs.;
• Fir cones – 8–10 pcs.;
• Red wool thread – 1.5 – 2 m;
• Bell – 1 pc.;
• Red ribbon 1 cm wide – 60 cm;
• Artificial berries – 3 – 4 branches.

• Glue;
• Scissors;
• Pencil;
• Artificial snow in an aerosol can.

We make the basis for a Christmas wreath from cardboard with our own hands.

To do this, use a compass to draw two circles of different diameters. You can use any utensil: a pan lid or a plate, which can be easily traced with a simple pencil.

Cut out both circles using scissors.

We take sheets of A-4 paper (can be replaced with newspaper) and, crumpling them, wrap them around the cardboard base.

We prepare spruce branches for work - we cut large ones to size, and give small ones an attractive appearance.

We attach the spruce branches to the base with glue. We glue each next branch so that it overlaps the base of the previous one. We continue to work until we cover the entire circle with pine needles.

We prepare pine cones to decorate the wreath.

We will also decorate the wreath with artificial berries.

A small bell.

And red woolen thread.

We wrap the thread evenly around the entire wreath.

Let's start decorating the spruce wreath with cones, which we glue in random order onto the needles.

Now you can attach artificial berries to the branches.

We make a small bow from the ribbon, which together with the bell we glue to the wreath so that it looks inside the circle.

All that remains is to treat the needles with snow. To do this, you can use artificial snow in an aerosol can.

Our Christmas wreath of fir branches with cones is ready.

All that remains is to find a place to hang it.

Christmas wreath made of thuja or fir

Beautiful Christmas wreaths are made not only from spruce or pine branches, but also from thuja, fir, and juniper.

To make it you will need:

• Sprigs of fir, thuja or juniper - 20 - 25 pcs.;
• Soft wire – 3 – 4 m;
• Green threads;
• Wire cutters.

A bouquet of fir branches can be purchased at the market.

You will need several of these bouquets. They become brittle after being exposed to the cold, so leave them that way until warmed up.

Now you can untie the bouquet and make several miniature bouquets from small branches, tying them with thread.

The frame for such a Christmas wreath can be a circle woven from a vine.

Or from twigs.

Or made of wire.

We attach fir bouquets to the base using thread or wire.

Gradually fill the entire circle with branches.

As a result, we get a beautiful Christmas wreath.

If you select all the branches to size and carefully fill the base with them, you can make such a beautiful wreath.

And decorate it in an original way.

Beautiful Christmas wreath made from an artificial tree

If you want to make a Christmas wreath with your own hands that can be preserved and used for many years, use artificial spruce branches. No, you don’t need to disassemble your New Year’s beauty for parts or purposefully buy a new one. It is enough to buy a garland of pine needles, which can be cut into small branches or used whole.

To make it you will need:

• Artificial spruce branches;
• Cardboard – 2 sheets;
• Christmas tree decorations – 3 – 4 pcs.;
• Red beads – 1 m;
• Twine – 10 m.

Tools and auxiliary materials:

• Scissors;
• Pencil;
• Glue gun;
• Plates of different diameters – 2 pcs.

We will make the basis for the Christmas wreath from cardboard.

To do this, we outline the plate.

First with a larger diameter, then with a smaller one.

In total you will need two cardboard blanks.

We cut out the templates with scissors to make 2 cardboard rings.

We will tie the pieces together with twine.

We wrap the base with a strong thread, placing both rings together.

We immediately make a loop on which you can later hang the finished Christmas wreath.

We take spruce branches. It is more convenient to work with a long garland, since it will not need to be attached several times.

We wrap the rings.

We continue to wrap the blank ring until we fill the base completely.

All that remains is to decorate the finished wreath. To do this, we wrap the ring in any shape with beads, glue on stars, toys, snowflakes.

We learned how to make Christmas wreaths from live and artificial Christmas trees and other conifers.

Symbolic Christmas wreath with candles

But if you adhere to Christmas traditions exactly, then you need to make a wreath with candles.

It is the candles that symbolize the approach of Christmas. There should be 4 large ones in total - according to the number of Sundays when they are lit, and 24 small ones. With the traditions and history of Christmas wreaths you can.

Definitely, a Christmas wreath and candles are a decoration for the festive table. But you can use it to decorate any flat surface, both indoors and outdoors. Let's start creating.

Traditional Advent wreath with candles

We will make a Christmas wreath with candles with our own hands on a base of fir branches. We will use 4 candles in total, which can be lit every Sunday on the eve of the holiday.

To make it you will need:

• Coniferous branches: spruce, boxwood, fir;
• Straw Circle;
• Pine cones – 30 – 40 pcs.
• Candles – 4 pcs.;
• Decoration materials.

Tools and auxiliary materials:

• Thin wire;
• Scissors;
• Glue gun.

We make the base of the wreath from ordinary straw, which can be replaced with foam plastic or other easily cut construction material.

We glue pine cones around the edge of the base.

It is necessary to glue both the outer and inner contours.

Fill the remaining surface of the base on one side with pine branches. You can combine several types of needles.

All that remains is to install 4 large candles on the finished Christmas wreath and decorate with available materials. Our version uses cinnamon sticks, bows, cookies, and stars.

Thanks to the decor, you can make wreaths in different colors.

Christmas composition from a wreath with candles

This composition can be used for the central decoration of a New Year's or Christmas table. A wreath of pine needles and snow-white candles will look noble and elegant.

To make it you will need:

• Coniferous branches
• Tray;
• Large white candles – 3 pcs.;
• Small white candles – 4 pcs.;
• Semolina;
• Artificial snow in an aerosol can;
• Decorative white crystals.

The basis of the composition will be a small tray. It is on this that we place large candles. You can take candles of different heights - this will make the composition look more interesting, or add small candles.

On top of the tray we place a finished Christmas wreath decorated with artificial snow.

All that remains is to decorate the composition. In this case, we will use ready-made crystals or branches with snow cover.

We place them directly on top of the needles.

Finally, sprinkle the entire composition with semolina to create the illusion of real grains of snow.

Preparing for the New Year by decorating your home is a pleasant event in which all family members participate. Inside the house, the entire decor is transformed, unusually shaped snowflakes, New Year's tinsel, and garlands appear. Every person secretly believes in Santa Claus, who needs to be shown that everyone in the household is ready for the celebration. The doors outside are decorated with a New Year's wreath.

An example of decorating a wooden door with a New Year's wreath

Many shops and markets offer a large selection of door wreaths for the New Year, but a hand-made wreath, like other New Year’s crafts, looks much more interesting and fabulous.

Once upon a time there lived a man, Johann Hinrich Wichern, in Hamburg. He took children from poor families into his care. Before the holiday, children often asked questions: “When will Santa Claus come, when will the holiday be?”

Design options for New Year's wreaths

And then, in 1839, Johann took an ordinary wooden cart wheel, this was the basis, then he made a wreath out of it, decorated it with 19 small red candles and 4 large white candles. Every early morning a person lit 1 red candle, and if it was Sunday, a large white candle burned. So, the children no longer asked questions, but counted the candles that remained. Gradually, local residents adopted this idea, the wreath was transformed and slightly changed its purpose.


Now it decorates almost every door before the New Year and serves as a New Year's decoration in Christmas traditions.

Making a wreath on the door with your own hands

So, what is needed to create an attribute for the New Year holidays? How to make a New Year's wreath for a door? Firstly, this is the mood, the expectation of a fairy tale and a miracle, confidence in a new good year. Secondly, help from your neighbor. Children, husband, grandmother - each family member can make some detail for a wreath on the front door.

The process of making a New Year's wreath with your own hands

Further, a wreath can be made from improvised materials without purchasing expensive corrugated paper or a lot of glitter in stores. Each special wreath has its own set of necessary materials.
Before you start creating a New Year's wreath for the door, you need to get your family together and figure out what the frame of the wreath will be made of, as well as how it can be decorated. There are many ideas:

1. The frame is made from:

1. Wreath decoration:

Basic tools:

1. Regular scissors for cutting shapes from paper;
2. PVA glue;
3. If the process involves dense wire, you will need scissors;

Depending on what interesting version of the wreath was invented, such materials and tools will be needed.

New Year's wreath of dried berries on the door

For the coming year, you can make a beautiful and unusual wreath on the door from dried berries.


To make it yourself you will need the following:

1. Polystyrene foam – it’s good if it’s dense;
2. Dried red berries - cranberries, rowan, viburnum, hawthorn, rose hips. Artificial berries;
3. You will need a simple pencil;
4. A wide strip of fabric, the same color as the berries;
5. Scissors, knife;
6. Bright satin ribbon;
7. Glue gun.

After collecting everything you need, you can start creating the decoration.

Stages of making a New Year's wreath

So, creating a New Year's attribute in stages:

The door craft is ready. If you have a bell, you can hang it in the center under the bow. The top of the craft on the sides of the bow and the inner circle at the bottom are decorated with artificial snow or cotton wool. The decoration is attached to the door with double-sided tape or simply taped on several sides so that when there is a gust of wind it does not fly off into the nearest snowdrift.

New Year's wreath made of natural spruce, pine and pine cones

For a New Year's wreath on the door you will need spruce, pine, and Christmas tree branches. The cones must be fresh (not last year’s, which have taken on a dark brown color with resin protruding). You also need cardboard, twine or wire, green corrugated paper or fabric, a bell, bunches of rowan, viburnum. You will need a compass, a knife, scissors, glue, toilet paper or paper napkins - it will be good if you have green corrugation. You will also need a red wool thread.

Wreath design made of pine and pine cones

So, painting the creation of a wreath step by step:

A wreath made of natural spruce looks very beautiful, festive and evokes the mood of magic and fairy tales. Watch the video on how to make a New Year's wreath from Christmas tree branches.

New Year's wreath on the door made of yarn

This product will be of more interest to crafters who knit. Because for this New Year's decoration you will need yarn. The color scheme of the wreath is varied - white, green, gray tones. You will also need PVA glue, scissors, a knife, toilet paper rolls, you can take a paper towel, the main thing is that it is the same diameter, newsprint, one or two pine cones, some dry berries.

Stages of making a New Year's wreath from yarn

To create a frame, you need to take the bushings and cut them into pieces of 3-5 cm. To prevent the bushing from becoming wrinkled, you need to cut it with a stationery knife. This will keep the round shape.

After this, on a large empty table or on the floor, you need to lay out all the pieces to see what size the wreath will be. All the pieces are collected onto a thread or wire. The thread is tied, the wire is twisted. The result was a circle layout for the wreath.


Next, take an old newspaper and cut it into strips. And also PVA glue. You need a lot of it, so you can replace it with boiled paste.

Soak the newspaper well in glue and glue the neatly assembled bushings on the thread. For good impregnation, the glued strips of newspaper need to be coated on top.

The result is a frame for the future wreath. Let everything dry for now. Now, after the base for the craft has dried, it’s time to decorate with threads. The yarn should be thick, 2 colors.

The process of making a wreath with threads

The main color should be completely wrapped around the entire circle. The tip of the thread is hidden inside the winding. After this, if desired, a square is knitted on knitting needles using the same threads of the same color, the size of the inner radius of the wreath base. The inside is sewn up with this square. The second tone of the thread is on the winding on top. It must be rare. Approximately 1 turn per 10 cm, after which the wreath can be decorated. Here you have a choice of ideas: pine cones, rare Christmas tree branches, knitted flowers or natural berries, apples or candies.

Option for the design and decoration of a wreath with pine cones

For individuality, you can attach Christmas tree decorations and rain to the wreath. But there is no need to do it sloppy.


The yarn should be visible - this is the basis of the wreath on the door. This New Year's door decoration will be distinguished by its simplicity and originality.